VISIT MAIN SITE
My Account
Toggle Nav
- CAD. BUILDER DRYWALL PRIMER WHITE 18.5L
- Primer, Sealer, Undercoat
- Latex
- Primer - Sealer
- 05158
-
Product Features:
- Good hiding and sanding characteristics
- For use under latex and oil-based finishes
- Evens out porosity for a topcoat finish free of flashing
- Good balance of price and performance
-
Product Description Marketing:
Canadian Builder Latex Drywall Primer is a professional interior drywall primer/undercoat for use on new drywall, interior masonry surfaces, and to prime patching compounds used with wall repairs prior to repainting. Best suited for use under latex and acrylic finish coats. Formulated to provide a combination of good hiding and sanding characteristics at a value price.
-
Best paint for:
- New drywall
- Interior masonry
- Drywall patching and repairs
-
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, and free of mildew, grease, soap film, sanding dust, or other contaminants. Remove all loose or peeling material from previously painted surfaces. Wash all surfaces with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).
WARNING! If you scrape, sand, or remove old lead paint from any surface, you may release lead dust. LEAD IS TOXIC. Exposure to lead dust can cause serious illness, such as brain damage—especially in children. Pregnant women should also avoid exposure. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum.
For additional information, Canadian customers can contact the Product Safety Division of Health Canada at 1-800-O-CANADA. U.S. customers can contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
-
Recommended Primers:
N/A -
Recommended Substrate:
New Drywall / Gypsum
