Skip to the beginning of the images gallery

Guardian Plus Anti-Scuff 100% Acrylic Interior Enamel

Guardian Plus Anti-Scuff revolutionizes paint performance. A 100% Acrylic Interior Latex that offers best in class performance with exceptional stain resistance, scrub, marr, burnish and scuff resistance for a long-lasting robust finish. Formulated with Low VOC content this product is ideal for Schools, Hospitals, Institutions, Hospitality, Commercial, and Residential projects where a low-odor, extremely durable finish is required. This product line exceeds MPI High Performance categories and is compliant with Canadian ECCC regulations.

PRICE $85.20

description

Name:Guardian Plus Anti-Scuff 100% Acrylic Interior Enamel
Category:Interior Topcoat
Chemistry:100% Acrylic Latex
Sheen:GL5 "Semi-Gloss"
Product Code:46023

Product Features:
- High-performance, ultra-durable interior wall and trim finish
- Self-priming on previously painted surfaces
- 100% acrylic enamel with exceptional scuff and mar resistance
- Low VOC formulation providing superior resistance to stains, burnishing, and abrasion
- Contains an Environment Canada–approved level of mildewcide to prevent mold, mildew, and algae growth on the surface of the coating
- Non-yellowing designer finish that provides long-lasting colour and protection
Product Description Marketing:
Guardian Plus Anti-Scuff revolutionizes paint performance. A 100% Acrylic Interior Latex that offers best in class performance with exceptional stain resistance, scrub, marr, burnish and scuff resistance for a long-lasting robust finish. Formulated with Low VOC content this product is ideal for Schools, Hospitals, Institutions, Hospitality, Commercial, and Residential projects where a low-odor, extremely durable finish is required. This product line exceeds MPI High Performance categories and is compliant with Canadian ECCC regulations.

application

Best paint for:
- Wood and drywall
- Masonry and composites
- Engineered surfaces
Surface preparation:
Surface Preparation

Surface preparation is important. All surfaces must be smooth, clean, dry, and free of mildew, grease, soap film, sanding dust, or other contaminants. Remove all loose or peeling material from previously painted surfaces. Wash all surfaces with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

WARNING! If you scrape, sand, or remove old lead paint from any surface, you may release lead dust. LEAD IS TOXIC. Exposure to lead dust can cause serious illness, such as brain damage, especially in children. Pregnant women should also avoid exposure. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. For additional information, Canadian customers may contact the Product Safety Division of Health Canada at 1-800-O-CANADA, and U.S. customers may contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).

Special Note: This product contains a sufficient level of an Environment Canada–approved mildewcide to prevent mold, mildew, and algae growth on the surface of the coating. However, because mildew growth is largely dependent on surface preparation and local conditions, Cloverdale Paint cannot guarantee that mildew will not grow through or on contaminants that may have deposited on the coating surface.
Recommended Primers:
Priming Recommendations

Pre-Painted Surfaces: Self-priming on properly prepared pre-painted surfaces. Wash with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust.

New or Bare Wood: Use Cloverdale Exterior Alkyd (15130) or Acrylic (05130).

Masonry: Self-priming or use Cloverdale Latex Block Filler (05700).

Drywall: Use Cloverdale Hi-Hide Latex Drywall Sealer (05250).

Ferrous Metals (Steel, Iron): Use a suitable anti-corrosive primer such as Cloverdale 703-Series water-based or 710-Series solvent-based Rustex primer.
Recommended Substrate:
New Drywall / Gypsum Prepainted Drywall / Gypsum Pre-Painted Surfaces Particle Board