Skip to the beginning of the images gallery

Kitchen & Bath Acrylic Enamel

Kitchen & Bath is formulated with the latest acrylic technology and provides maximum durability with superior stain resistance and washability. Its superior adhesion with smooth flow and leveling properties make Kitchen & Bath the best choice where the durability is required, particularly for use in kitchen and bathrooms. It is non yellowing and has low odour. This product features high moisture, mildew and burnish resistance in a fast drying, extremely durable finish. Kitchen & Bath has excellent colour retention, gloss retention and stain resistance properties. Approved by the Master Painter's Institute under category # 141. High Performance Architectural Latex Gloss Level 5 and is Environment Canada VOC compliant.

PRICE $80.89

description

Name:Kitchen & Bath Acrylic Enamel
Category:Interior Paint
Classification:For Kitchen & Bath
Chemistry:100% Acrylic Latex
Sheen:GL5 "Semi-Gloss"
Size/Liters:01 05 14
Product ID:992
Product Code:03650

Product Features:
• Self-priming to most non-porous surfaces
• Formulated for repainting areas that require a tough, durable, scrubbable finish
• Non-yellowing
• Low odour
• Soap and Water clean-up
• Excellent application properties
• Environmentally friendly - Near zero VOC
• Contains an Environment Canada approved mildewcide
Product Description Marketing:
Kitchen & Bath is formulated with the latest acrylic technology and provides maximum durability with superior stain resistance and washability. Its superior adhesion with smooth flow and leveling properties make Kitchen & Bath the best choice where the durability is required, particularly for use in kitchen and bathrooms. It is non yellowing and has low odour. This product features high moisture, mildew and burnish resistance in a fast drying, extremely durable finish. Kitchen & Bath has excellent colour retention, gloss retention and stain resistance properties. Approved by the Master Painter's Institute under category # 141. High Performance Architectural Latex Gloss Level 5 and is Environment Canada VOC compliant.

application

Best paint for:

• Walls & ceilings
• Woodwork
• Cabinets
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).

Special Note: This product contains a sufficient level of an Environment Canada approved mildewcide to prevent mold, mildew and algae from growing on the surface of the coating. As mildew growth is, to a large degree dependent on a surface preparation and local conditions, Cloverdale Paint cannot guarantee that mildew will not grow through or on any contaminants which may have deposited on the surface of the coating.
Recommended Primers:
Pre-Painted Surfaces: Self-Priming on properly-prepared pre-painted surfaces. Wash with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80 to 120 grit sandpaper on a hand sander. Remove all sanding dust.

New or Bare Wood: Use Cloverdale Exterior Alkyd (15130) or Acrylic (05130).

Masonry: Self-priming or Cloverdale Latex Block Filler (05700).

Ferrous Metals (Steel, Iron): Use a suitable anti-corrosive primer such as Cloverdale 703-Series water-based or 710-Series Solvent-based Rustex primer.
Recommended Substrate:
New Drywall / Gypsum Prepainted Drywall / Gypsum Pre-Painted Surfaces Stucco Brick Ferrous Metals Particle Board New Wood Weathered Wood Composite Siding Composite Wood