Skip to the beginning of the images gallery

Premium Classic Super Eggshell (GL2)

A premium quality finish for use on all interior walls including drywall, plaster, masonry, and primed wood. The rich low sheen finish minimizes the appearance of physical surface imperfections. This product has excellent hiding and application characteristics including spatter resistance and good flow with excellent leveling properties. It also has good scrub resistance and stain resistance. Approved by the Master Painter's Institute under category # 44. Interior Latex Gloss Level 2.

PRICE $67.89

description

Name:Premium Classic Super Eggshell (GL2)
Category:Interior Paint
Classification:Premium Interior Paint
Chemistry:Acrylic Latex
Sheen:GL2 "Eggshell" or "Satin"
Size/Liters:14 01 05
Product ID:20
Product Code:03240

Product Features:
• Excellent hiding and application characteristics
• Has good scrub and stain resistance
• Good application properties by brush roller or spray
• Improved burnish and mar resistance over flat finishes
Product Description Marketing:
A premium quality finish for use on all interior walls including drywall, plaster, masonry, and primed wood. The rich low sheen finish minimizes the appearance of physical surface imperfections. This product has excellent hiding and application characteristics including spatter resistance and good flow with excellent leveling properties. It also has good scrub resistance and stain resistance. Approved by the Master Painter's Institute under category # 44. Interior Latex Gloss Level 2.

application

Best paint for:

• Walls & ceilings
• Drywall, masonry
• Over primed wood
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
Recommended Primers:
New or Bare Wood: Use Cloverdale Exterior Alkyd (15130) or Acrylic (05130).

Masonry: Self-priming or Cloverdale Latex Block Filler (05700).

Drywall: Cloverdale Hi-Hide Latex Drywall Sealer (05250).

Ferrous Metals (Steel, Iron): Use a suitable anti-corrosive primer such as Cloverdale 703-Series water-based or 710-Series Solvent-based Rustex primer.

Consult your Cloverdale Representative for other substrates.
Recommended Substrate:
Prepainted Drywall / Gypsum Pre-Painted Surfaces