VISIT MAIN SITE
My Account
Toggle Nav
- Prime Solution Alkyd Stain-Blocking Speed Primer
- Primer, Sealer, Undercoat
- Alkyd
- Primer - Sealer
- 15910
-
Product Features:
- Fast drying
- Interior / exterior use
- Excellent adhesion, flexibility, solvent resistance, stain resistance, and early sanding times
- Excellent multi-surface primer
- Meets Environment Canada VOC Category #39
-
Product Description Marketing:
Alkyd Stain-Blocking Speed Primer is a fast drying, interior/exterior bonding and stain-blocking primer for use where speed of re-coating is important. Excellent adhesion, flexibility, solvent resistance, staining resistance and early sanding times makes this an excellent multi-surface surface primer for use on a variety of substrates including composite materials and non-ferrous metals. This product meets federal VOC requirements for Environment Canada under Category #39.
-
Best paint for:
- Metal and millwork
- Fiberglass, plastic, and tile
- Glass and ceramics
-
Surface preparation:
Surface Preparation
Surface preparation is important. All surfaces must be smooth, clean, dry, and free of mildew, grease, soap film, sanding dust, or other contaminants. Remove all loose or peeling material from previously painted surfaces. Wash all surfaces with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).
WARNING! If you scrape, sand, or remove old lead paint from any surface, you may release lead dust. LEAD IS TOXIC. Exposure to lead dust can cause serious illness, such as brain damage, especially in children. Pregnant women should also avoid exposure. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. For additional information, Canadian customers may contact the Product Safety Division of Health Canada at 1-800-O-CANADA, and U.S. customers may contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
-
Recommended Primers:
N/A -
Recommended Substrate:
Prepainted Drywall / Gypsum Pre-Painted Surfaces Concrete / Masonry Stucco Brick Ferrous Metals Non-Ferrous Metals Particle Board New Wood Weathered Wood Composite Siding Composite Wood Vinyl Glazed Tile / Brick Glass Plastic Interior Concrete Floors
