VISIT MAIN SITE
My Account
Toggle Nav
Sharkskin Waterbased Translucent Stain
Sharkskin Translucent is a premium water-based penetrating stain and sealer designed to enhance and protect exterior wood surfaces. It features a proprietary acrylic resin that ensures deep penetration, minimizes cracking and peeling, and delivers a durable, long-lasting finish. Fortified with Trans Oxide pigments, it provides superior protection against harsh weather, UV rays, and mildew while highlighting the natural beauty of the wood. This low-VOC formula offers allweather protection and enhances the wood’s natural appearance. MPI-approved under Category 33.
$87.88
- Sharkskin Waterbased Translucent Stain
- Wood Stain
- Waterbased Translucent Stain
- 100% Acrylic Latex
- 01 05 14
- 72700
-
Product Features:
• Deep penetrating acrylic formula
• Self-priming on most woods
• Water-based Acrylic
• Environment Canada approved level of mildewcide to prevent mold, mildew and algae from growing on the surface of the coating
• Rich, designer finish that provides long-lasting colour and protection -
Product Description Marketing:
Sharkskin Translucent is a premium water-based penetrating stain and sealer designed to enhance and protect exterior wood surfaces. It features a proprietary acrylic resin that ensures deep penetration, minimizes cracking and peeling, and delivers a durable, long-lasting finish. Fortified with Trans Oxide pigments, it provides superior protection against harsh weather, UV rays, and mildew while highlighting the natural beauty of the wood. This low-VOC formula offers all-weather protection and enhances the wood’s natural appearance. MPI-approved under Category 33.
-
Best paint for:
• Siding, fencing, decks
• Outdoor furniture
• Dimensional lumber -
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).
WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
-
Recommended Substrate:
New Wood Weathered Wood