Timberlox Interior Wiping Stain

Timberlox Interior Wiping Stain is a solvent base semi transparent wiping stain for use on interior unfinished wood work including furniture, doors, moldings and millwork. This product features excellent penetrating and grain definition properties and will not streak or leave lap lines. This is a pigmentbased stain which will last much longer than dye-based stains. May be applied by brush, spray, or wiping with a soft cloth. Best suited for use under solvent base and waterborne clear coats. Approved by the Master Painter's Institute under category # 90.

PRICE $80.77

description

Name:Timberlox Interior Wiping Stain
Category:Wood Stain
Chemistry:Oil
Sheen:Wood Stain
Size/Liters:01 05
Product Code:16204

Product Features:
- Interior
- For furniture, doors, moldings and millwork
- Excellent penetrating and grain definition properties
- Will not streak or leave lap lines
- Pigmentbased stain that will last much longer than dye-based stains
- Approved by MPI, category #90
Product Description Marketing:
Timberlox Interior Wiping Stain is a solvent base semi transparent wiping stain for use on interior unfinished wood work including furniture, doors, moldings and millwork. This product features excellent penetrating and grain definition properties and will not streak or leave lap lines. This is a pigmentbased stain which will last much longer than dye-based stains. May be applied by brush, spray, or wiping with a soft cloth. Best suited for use under solvent base and waterborne clear coats. Approved by the Master Painter's Institute under category # 90.

application

Best paint for:
- Unfinished woodwork
- Furniture, doors
- Moldings, millwork
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F). WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
Recommended Primers:
New or Bare Wood: Self-Priming.
Recommended Substrate:
New Wood Weathered Wood