VISIT MAIN SITE
My Account
Toggle Nav
WeatherOne Covercoat® Exterior 100% Acrylic Latex Topcoat
CoverCoat Exterior Flat 100% Acrylic Latex is a premium latex finish for use on stucco, masonry and primed wood. An ideal choice for masking the effects of uneven light refraction on irregular surfaces such as concrete “tilt up” construction and all exterior textured substrates. Provides a rich even finish with excellent hiding properties. This product may also be applied to exterior metal and galvanized surfaces where proper surface preparation and applicable primers will be required. Provides a rich, even finish with excellent hiding properties. CoverCoat Flat Latex can be applied when air temperatures are as low as 5°C (41°F). Approved by the Master Painter's Institute under category # 10, gloss level 1.
$75.89
- WeatherOne Covercoat® Exterior 100% Acrylic Latex Topcoat
- Exterior Paint
- Premium Exterior Paint
- 100% Acrylic Latex
- GL1 "Flat" or "Matte"
- 01 05 14
- 25
- 02203
-
Product Features:
- Excellent hiding and durability in a rich, flat finish
- A premium quality 100% Acrylic Latex exterior finish for use on stucco, masonry, primed wood, exterior metal and galvanized surfaces
- Contains an Environment Canada approved mildewcide
- Flat finish minimizes light reflection to mask surface imperfections and irregularities
- High moisture vapour permabilitiy to minimize the risk of blistering and peeling
- Good alkali resistance for application to concrete
-
Product Description Marketing:
CoverCoat Exterior Flat 100% Acrylic Latex is a premium latex finish for use on stucco, masonry and primed wood. An ideal choice for masking the effects of uneven light refraction on irregular surfaces such as concrete “tilt up” construction and all exterior textured substrates. Provides a rich even finish with excellent hiding properties. This product may also be applied to exterior metal and galvanized surfaces where proper surface preparation and applicable primers will be required. Provides a rich, even finish with excellent hiding properties. CoverCoat Flat Latex can be applied when air temperatures are as low as 5°C (41°F). Approved by the Master Painter's Institute under category # 10, gloss level 1.
-
Best paint for:
• Wood, metal
• Stucco, masonry
• Vinyl, aluminum siding -
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 5˚C (41˚F).
WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
-
Recommended Primers:
Pre-Painted Surfaces: Self-Priming on properly-prepared pre-painted surfaces. Wash with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80 to 120 grit sandpaper on a hand sander. Remove all sanding dust.
New or Bare Wood: Use Cloverdale Exterior Alkyd (15130) or Acrylic (05130).
Masonry: Self-priming or Cloverdale Latex Block Filler (05700).
Ferrous Metals (Steel, Iron): Use a suitable anti-corrosive primer such as Cloverdale 703-Series water-based or 710-Series Solvent-based Rustex primer.
-
Recommended Substrate:
Pre-Painted Surfaces Concrete / Masonry Stucco Brick Ferrous Metals Particle Board New Wood Weathered Wood Composite Siding Composite Wood
