VISIT MAIN SITE
My Account
Toggle Nav
WeatherOne® Semi-Transparent 100% Acrylic Stain
WeatherOne® Exterior 100% Acrylic Semi-Transparent Stain is a premium quality, pure acrylic stain that provides a long lasting decorative finish by allowing the natural wood grain to show through. This product is a fast drying, low sheen, abrasion resistant product that provides excellent penetration into the wood surface. This is a water-based, low VOC product which develops a high degree of water resistance when dry. 06680 is a clear tint base and must be tinted with universal colourant.
$58.89
- WeatherOne® Semi-Transparent 100% Acrylic Stain
- Wood Stain
- Transparent Premium Wood Stain
- 100% Acrylic Latex
- Wood Stain
- 01 05 14
- 64
- 06680
-
Product Features:
• Deep penetrating acrylic formula
• Self-priming on most woods
• Water-based Acrylic
• Environment Canada approved level of mildewcide to prevent mold, mildew and algae from growing on the surface of the coating
• Rich, designer finish that provides long-lasting colour and protection -
Product Description Marketing:
WeatherOne® Exterior 100% Acrylic Semi-Transparent Stain is a premium quality, pure acrylic stain that provides a long lasting decorative finish by allowing the natural wood grain to show through. This product is a fast drying, low sheen, abrasion resistant product that provides excellent penetration into the wood surface. This is a water-based, low VOC product which develops a high degree of water resistance when dry. 06680 is a clear tint base and must be tinted with universal colourant.
-
Best paint for:
• Siding, fencing, decks
• Outdoor furniture
• Dimensional lumber -
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).
WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
-
Recommended Primers:
NULL -
Recommended Substrate:
New Wood Weathered Wood