VISIT MAIN SITE
My Account
Toggle Nav
WeatherOne® Solid Hide Acrylic Siding Stain
WeatherOne 100% Acrylic Solid Hide Stain is Cloverdale Paint’s highest quality exterior acrylic stain backed by a 15-year limited warranty. Formulated with the latest acrylic technology, additional volume solids and mildewcide to aid in slowing the growth of mold & mildew on the surface of the stain, make this an ideal choice for vertical wood siding, wood composites, shingles, trim and fascia. This product also features superior hiding and adhesion properties.
$62.89
- WeatherOne® Solid Hide Acrylic Siding Stain
- Wood Stain
- Solid Colour Premium Wood Stain
- 100% Acrylic Stain
- Wood Stain
- 01 05 14
- 50
- 72303
-
Product Features:
• 100% Acrylic allows substrate to breathe
• Self-priming on most woods
• Higher volume solids provides better hiding, coverage and durability.
• Environment Canada approved level of mildewcide to prevent mold, mildew and algae from growing on the surface of the coating.
• LOW VOCs provide low odour and reduce the environmental impact
• Rich, designer finish that provides long-lasting colour and protection
• 15 Year Limited Warranty. Contact your Cloverdale Paint Store, Representative or Dealer for detailed warranty certificate. -
Product Description Marketing:
WeatherOne 100% Acrylic Solid Hide Stain is Cloverdale Paint’s highest quality exterior acrylic stain backed by a 15-year limited warranty. Formulated with the latest acrylic technology, additional volume solids and mildewcide to aid in slowing the growth of mold & mildew on the surface of the stain, make this an ideal choice for vertical wood siding, wood composites, shingles, trim and fascia. This product also features superior hiding and adhesion properties.
-
Best paint for:
• Fences, railings
• Fiber, cement siding
• Shingles, trim, fascia -
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).
WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
Special Note: This product contains a sufficient level of an Environment Canada approved mildewcide to prevent mold, mildew and algae from growing on the surface of the coating. As mildew growth is, to a large degree dependent on a surface preparation and local conditions, Cloverdale Paint cannot guarantee that mildew will not grow through or on any contaminants which may have deposited on the surface of the coating.
-
Recommended Primers:
Pre-Painted Surfaces: Self-Priming on properly-prepared pre-painted surfaces. Wash with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80 to 120 grit sandpaper on a hand sander. De-gloss by sanding and must be soundly adhereing prior to repainting. Remove all sanding dust.
New or Bare Wood: Self-priming. Use an Exterior Alkyd (15130) or Acrylic (05130) primer on pressure treated, cedar or redwood. Pressure treated lumber must be allowed to 'season' for 28 days prior to painting. For woods prone to Tannin Bleeding and when lighter colored stains are selected, a stain blocking primer must be used.
Masonry: Self-priming.
Drywall: Not recommended
Steel: Not recommended
-
Recommended Substrate:
Pre-Painted Surfaces Concrete / Masonry Stucco Brick Ferrous Metals Particle Board New Wood Weathered Wood Composite Siding Composite Wood
