Horizon Drywall Sealer

Horizon Interior Drywall Sealer is an ultra-low VOC, low odor paint designed to significantly reduce odor & polluting vapors released into the air which can be harmful or irritating to the user or occupants of the area being painted. This flat, vinyl acrylic latex sealer is specifically formulated for use on interior porous surfaces such as drywall, plaster, textured ceilings, wallboard, fiberboard, and hardboard.Horizon coatings are approved for LEED v.4 (Leadership in Energy and Environmental Design) program qualifying them for credit points within the “green building” rating system. The aim of the rating system is to improve occupant well being, environmental performance, and economic returns of buildings using established and innovative practices, standards, and technologies. Approved by the Master Painter's Institute under category # 149. Environment Canada VOC compliant category #42.

PRICE $52.69

description

Name:Horizon Drywall Sealer
Category:Interior Paint
Classification:Interior Primers & Sealers
Chemistry:Acrylic Latex
Sheen:Primer - Sealer
Size/Liters:01 05 14
Product ID:41
Product Code:90700

Product Features:
• Very low odor during application and drying
• Ultra Low VOC's to contribute to atmospheric pollution
• Can seal fresh drywall, pre painted walls, and an excellent colour transition primer
• Designed for use with Horizon Interior topcoats providing a complete low odor/ low VOC system
Product Description Marketing:
Horizon Interior Drywall Sealer is an ultra-low VOC, low odor paint designed to significantly reduce odor & polluting vapors released into the air which can be harmful or irritating to the user or occupants of the area being painted. This flat, vinyl acrylic latex sealer is specifically formulated for use on interior porous surfaces such as drywall, plaster, textured ceilings, wallboard, fiberboard, and hardboard.Horizon coatings are approved for LEED v.4 (Leadership in Energy and Environmental Design) program qualifying them for credit points within the “green building” rating system. The aim of the rating system is to improve occupant well being, environmental performance, and economic returns of buildings using established and innovative practices, standards, and technologies. Approved by the Master Painter's Institute under category # 149. Environment Canada VOC compliant category #42.

application

Best paint for:

• Drywall, plaster
• Textured ceilings, wallboard
• Fiberboard, hardboard
Surface preparation:
Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

WARNING! If you scrape, sand or remove old lead paint from any surface you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPAvacuum. For additional information, Canadian customers contact the Product Safety division of Health Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).
Recommended Primers:
N/A
Recommended Substrate:
New Drywall / Gypsum Particle Board New Wood