Premium Classic High Performance Waterborne

Premium Classic High Performance Semi-Gloss Acrylic Latex is a super premium interior wall finish for use where better washability and stain resistance compared to conventional interior latex coatings is required. This product features superior flow and leveling application properties. The low odour fast dry formula is ideal for use on all interior walls and trim including drywall, plaster, masonry and primed wood. Premium Classic High Performance Semi Gloss Acrylic offers excellent interior durability, hardness, scrubbability and adhesion. This product is ideally suited for where a higher performance level is desired.

PRICE $85.89

description

Name:Premium Classic High Performance Waterborne
Category:Interior Topcoat
Chemistry:Acrylic Latex
Sheen:GL5 "Semi-Gloss"
Product Code:03923

Product Features:
- 100% acrylic resins
- Self-priming on most non-porous surfaces
- Formulated for painting areas that require a tough, durable, scrubbable finish
- Non-yellowing
- Low odour
- Soap and water clean-up
- Excellent application properties
- Environmentally friendly – low VOCs
Product Description Marketing:
Premium Classic High Performance Semi-Gloss Acrylic Latex is a super premium interior wall finish for use where better washability and stain resistance compared to conventional interior latex coatings is required. This product features superior flow and leveling application properties. The low odour fast dry formula is ideal for use on all interior walls and trim including drywall, plaster, masonry and primed wood. Premium Classic High Performance Semi Gloss Acrylic offers excellent interior durability, hardness, scrubbability and adhesion. This product is ideally suited for where a higher performance level is desired.

application

Best paint for:
- Wood and drywall
- Masonry and composites
- Engineered surfaces
Surface preparation:
Surface Preparation

Surface preparation is important. All surfaces must be smooth, clean, dry, and free of mildew, grease, soap film, sanding dust, or other contaminants. Remove all loose or peeling material from previously painted surfaces. Wash all surfaces with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

WARNING! If you scrape, sand, or remove old lead paint from any surface, you may release lead dust. LEAD IS TOXIC. Exposure to lead dust can cause serious illness, such as brain damage, especially in children. Pregnant women should also avoid exposure. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. For additional information, Canadian customers may contact the Product Safety Division of Health Canada at 1-800-O-CANADA, and U.S. customers may contact the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323).

Special Note: This product contains a sufficient level of an Environment Canada–approved mildewcide to prevent mold, mildew, and algae growth on the surface of the coating. However, because mildew growth is largely dependent on surface preparation and local conditions, Cloverdale Paint cannot guarantee that mildew will not grow through or on contaminants that may have deposited on the surface of the coating.
Recommended Primers:
Priming Recommendations

Pre-Painted Surfaces: Self-priming on properly prepared pre-painted surfaces. Wash with a solution of 3 tablespoons of phosphate-free TSP in a gallon of warm water. Rinse thoroughly, allow to dry, and then scuff sand using 80–120 grit sandpaper on a hand sander. Remove all sanding dust.

New or Bare Wood: Use Cloverdale Exterior Alkyd (15130) or Acrylic (05130).

Masonry: Self-priming or use Cloverdale Latex Block Filler (05700).

Drywall: Use Cloverdale Hi-Hide Latex Drywall Sealer (05250).

Ferrous Metals (Steel, Iron): Use a suitable anti-corrosive primer such as Cloverdale 703-Series water-based or 710-Series solvent-based Rustex primer.
Recommended Substrate:
New Drywall / Gypsum Prepainted Drywall / Gypsum Pre-Painted Surfaces Particle Board