Sunfast® Exterior Waterborne Wood Finish Cedar Tone, Satin (GL2)

Sunfast® Exterior Waterborne Wood Finish Cedar Tone, Satin (GL2)

Timberlox Waterborne Alkyd Varnish, GL5 Semi-Gloss - Clear

TIMBERLOX WB ALK URE VAR SEMI-GLOS
$64.67
  • Timberlox Waterborne Alkyd Varnish, GL5 Semi-Gloss - Clear
  • Varnish & Clear Coat
  • Waterborne Alkyd
  • GL5 "Semi-Gloss"
  • 01 05
  • 59334
  • Product Features:

    • Good hardness, adhesion, and durability
    • Nonflammable and resistant to hot and cold water, household chemicals, and alcohol
    • Environmentally friendly, with very low odour levels
    • Cleans up with soap and water
    • Waterborne Alkyd Varnish meets the Environment Canada National Volatile Organic Compound Emission Standards for architectural varnishes
    • Approved by the Master Painters' Institute under Category 129
  • Product Description Marketing:

    A general purpose interior varnish featuring good hardness, adhesion, and durability. This product is nonflammable and resistant to hot and cold water, household chemicals and alcohol. Environmentally friendly, with very low odour levels, this product cleans up with soap and water. Waterborne Alkyd Varnish meets the Environment Canada National Volatile Organic Compound Emission Standards for architectural varnishes. Approved by the Master Painters's Institute under Category 129.

  • Best paint for:

    • Interior wood furniture
    • Shelving, cabinets
    • Doors, woodwork
  • Surface preparation:

    Surface preparation is important. All surfaces must be smooth, clean, dry, free of mildew, grease, soap film, sanding dust or other contaminants. Remove all loose or peeling material from previously-painted surfaces. Wash all surfaces with a solution of 3 tablespoons of (Phosphate-free) TSP in a gallon of warm water. Rinse thoroughly, allow to dry and then scuff sand using 80-120 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply at temperatures below 10˚C (50˚F).

  • Recommended Primers:

    New or Bare Wood: Self-Priming or use Timberlox Sanding Sealer (42114).
  • Recommended Substrate:

    New Wood Weathered Wood Composite Wood Wood Floors